|
|
 |
|
XL1 - $2500 - 28" x 15" |
 |
The XL1 is a heavy duty hot wire CNC foam cutter.
Shafts are 3/4" and the ACME screws are 1/2"-10
The machine is massive and more stable then the
Full and Pro packages and is capable of reaching
higher cutting and jog speeds then the full and pro
packages.
Hot Wire power supply is not included with the XL1
Includes:
All Mechanical parts, shafts, ACME screws, bearing
mounting brackets.
Electronics cables and motors - plug and play.
Specs:
Effective
Horizontal travel: 28"
Effective
Vertical travel: 15"
Axis: 4 independent axis (will cut tapered wings).
Electronics: 4 axis pulse and direction on Printer port.
Motors: NEMA23 2.8A 3.3V
Power: 110V 200W.
Cutting Speed: Software dependent - up to 30"/min
Resolution: 4000 steps per inch.
Software is available at www.foamwork.net
Electronic board assembled and ready to run
|
|
|
4 X Axis shafts - tapped on both ends
4 Y Axis shafts - tapped on both ends
2 Y Axis ACME screws - Machined to 1/4" one one end
2 X Axis ACME screws - Machined to 1/4" one one end |
|
 |
4 Axis
electronic board (assembled and tested)
4 Stepper Motors with 4 cables.
Power supply for the electronic board. (110V or
220V)
PC to board D25 cable
Power cable for power supply
Software: Will work with Mach3 and Foamworks
Assembly
Manual |
|
|
XL2 - $3250 - 35" x
22" x 60"
|
|
|
|
The XL2 is a heavy duty hot wire CNC foam cutter.
Shafts are 3/4" and the ACME screws are 1/2"-10
The machine is capable of reaching higher cutting
speeds
Includes:
All Mechanical parts, shafts, ACME screws, bearing
mounting brackets.
Electronics cables and motors - plug and play.
Specs:
Horizontal travel: 30"
Vertical travel: 22"
Axis: 4 independent axis (will cut tapered wings).
Electronics: 4 axis pulse and direction on Printer port.
Motors: NEMA23 2.8A 3.3V
Power: 110V 200W.
Cutting Speed: Software dependent - up to 30"/min
Resolution: 4000 steps per inch.
Software is available at www.foamwork.net
Electronic box assembled and ready to run |
| |
4 X Axis shafts - tapped on both ends
4 Y Axis shafts - tapped on both ends
2 Y Axis ACME screws - Machined to 1/4" one one end
2 X Axis ACME screws - Machined to 1/4" one one end |
|
 |
4 axis
electronic box - assembled and ready to run
Plug and Play
110V or 220V
Plug and Play - no soldering or assembly required
Software: Will work with Mach3 and Foamworks
|
|
|
Variable
Hot Wire power supply - 0-50V 3A
Will heat up wire up to 60" |
|
|
|
|
|
XL3 - $3750 -
42" x 32" x 100"
|
|
|
|
The XL3 is a heavy duty hot wire CNC foam cutter.
Shafts are 3/4" and the ACME screws are 1/2"-10
The machine is capable of running faster then the
full and pro packages
The XL3 is great for making wings, fuse, foam signs
crown moldings and tapered columns.
Includes:
All Mechanical parts, shafts, ACME screws, bearing
mounting brackets.
Electronics cables and motors - plug and play.
Specs:
Horizontal travel: 42"
Vertical travel: 32"
Axis: 4 independent axis (will cut tapered wings).
Electronics: 4 axis pulse and direction on Printer port.
Motors: NEMA23 2.8A 3.3V
Power: 110V 500W.
Cutting Speed: Software dependent - up to 30"/min
Resolution: 4000 steps per inch.
Software is available at www.foamwork.net
but for best
results we recommend Mach3 + DeskCNC
|
|
|
4 X Axis shafts - tapped on both ends
4 Y Axis shafts - tapped on both ends
2 Y Axis ACME screws - Machined to 1/4" one one end
2 X Axis ACME screws - Machined to 1/4" one one end |
|
|
4 axis
electronic box - assembled and ready to run
Plug and Play
110V or 220V
Plug and Play - no soldering or assembly required
Software: Will work with Mach3 and Foamworks |
|
|
500W Variable transformer
will heat up wire up to 10'
100' of hot wire is also included |
|
|
|
|
|
|
|
